BPDWT - VARFLO SLEEVINGS
- MSDS: BPDWT
- Manufacturer: VARFLEX CORP
- Product Name: VARFLO SLEEVINGS
- National Stock Number: 5970-00-059-7325
Product Identification
Product ID:VARFLO SLEEVINGS
MSDS Date:02/21/1992
FSC:5970
NIIN:00-059-7325
MSDS Number: BPDWT
Responsible Party
ROME, NY 13440
US
Emergency Phone: 315-336-4400
Info Phone: 315-336-4400
Preparer: JAMES SMALL
Cage: 79074
Contractor
Telephone: 315-336-4400
Cage: 79074
Ingredients
POLYVINYL CHLORIDE RESIN
CAS: 9002-86-2
LEAD SULFATE, TRIBASIC
Fraction By Weight: <1.5%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.05 MG/M3 (PB)
ANTIMONY TRIOXIDE (SARA III)
CAS: 1309-64-4
RTECS: CC5650000
Fraction By Weight: <2.5%
OSHA PEL 0.5 MG/M3 (SB)
ACGIH TLV: 0.5 MG SB/M3; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHENOXARSINE, 10,10'-OXYDI- (SARA III)
CAS: 58-36-6
RTECS: SP6800000
Fraction By Weight: <0.1%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FIBERGLASS MAY CAUSE MECHANICAL
IRRITATION TO SKIN AND EYES. INGESTION IS UNLIKELY TO OCCUR.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CONFIRMED OR SUSPECTED
CARCINOGENS.
Effects of Overexposure:EYE OR SKIN IRRITATION.
First Aid
First Aid:EYES: FLUSH WITH RUNNING WATER FOR 15 MINUTES WHILE LIFTING
EYELIDS OPEN. GET MEDICAL ATTENTION IMMEDIATELY. SKIN: WASH WITH
SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. GET MEDICAL ADVICE.
INHALATIO N: REMOVE TO FRESH AIR. INGESTION: DO NOT INDUCE
VOMITING. RINSE MOUTH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION.
Fire Fighting
Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:USE WATER
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:HCL LIBERATED DURING COMBUSTION AND AT
550F OR GREATER.
Handling
Handling and Storage Precautions:FOR PROLONGED PERIODS, STORE IN
ABSENCE OF DIRECT SUNLIGHT.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:LOCAL EXHAUST TO PROVIDE ADEQUATE VENTILATION.
Protective Gloves:USE WORK GLOVES WITH SENSITIVE SKIN.
Eye Protection:SAFETY GLASSES RECOMMENDED
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Decomp Temp:Decomp Text:>500F,>260C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CYLINDRICAL FIBERGLASS BRAID, PVC COATED WITH A
SLIGHT ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
DIRECT CONTACT WITH SILVER AND COPPER UNDER CERTAIN CONDITIONS CAN
CAUSE CORROSION.
Stability Condition to Avoid:HIGH TEMPERATURES OF 500F OR GREATER.
Hazardous Decomposition Products:HCL
Disposal
Waste Disposal Methods:DISPOSAL OF WASTE AND HAZARDOUS MATERIAL SHALL
COMPLY WITH LOCAL, STATE AND FEDERAL ENVIRONMENTAL PROTECTION
AGENCY REGULATIONS. SEND WASTE MATERIAL TO AN APPROVED MUNICIPAL OR
INDUSTRIAL LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.